A factory audit evaluates the system that makes the product. A product inspection evaluates the product in front of you. Buyers often commission one and expect the other; defining the objective first prevents a false sense of assurance.

Factory audit: the system

An audit examines the production environment, process controls, quality records, calibration, traceability, and corrective-action system. It answers whether the supplier can consistently make the product to specification, not whether a particular lot is good.

Product inspection: the lot

An inspection examines a specific lot against acceptance criteria. It answers whether this shipment should be released. It does not prove that the next lot will be the same unless the process is controlled.

When to use each

Use an audit before onboarding a new supplier, after a significant change, or when a quality problem cannot be explained by the lot alone. Use an inspection before shipment, after a corrective action, or whenever the cost of a bad lot exceeds the inspection cost.

Write acceptance criteria first

Inspection without criteria becomes opinion. Define the characteristic, the method, the sample size, the defect classification, and the decision rule. For visual attributes, use a boundary sample or a written limit rather than adjectives.

Close the loop

An audit finding or inspection defect should have an owner, a containment action, a root-cause action, and a verification date. A report that is not connected to a decision is cost without control.

Reference standards

  • ISO 19011 guidelines for auditing management systems
  • ISO 2859-1 sampling procedures for inspection by attributes
  • ISO 9001 quality-management requirements

References are for orientation. Contract-specific obligations should be confirmed with the relevant authority or qualified adviser.

About the author

Priya Raman

Priya owns inspection protocols, supplier audits, and compliance documentation. Her team defines what evidence is required, how it is verified, and when a shipment should not be released.