Dual sourcing is a risk decision, not a procurement slogan. Done well, it creates a qualified alternative for critical items. Done badly, it doubles qualification work and gives two suppliers enough volume to be mediocre at both.
Start from failure modes
List the failure modes that matter: single-site disruption, material shortage, tooling loss, quality drift, logistics blockage, or commercial failure. Then identify the parts and processes where that failure would stop a program. Not every item needs a second source.
Segment the bill of materials
Separate critical, single-source, regulated, and commodity items. Critical items may need a qualified second source; commodities may be dual-sourced through distribution. A blanket dual-source policy wastes qualification effort on parts where switching is already easy.
Qualify the alternative, not just the price
A second source must meet the same specification, quality gates, and change-control obligations. Run a sample and, where relevant, a first-article or PPAP-style approval. Verify capacity and lead time under load, not only in a quote.
Design the split deliberately
Common approaches are a primary/secondary split, a geographic split, or a capacity-reserve model. Choose based on the failure mode and supplier economics. Keep enough volume with each supplier to remain credible, and define the activation trigger for the second source in advance.
Control the cost of complexity
Dual sourcing adds tooling, inspection, approvals, and administrative work. Standardize interfaces, share approved specifications, and avoid unnecessary part-number proliferation. Measure the risk reduction against the added cost; the goal is resilience, not duplication.
Reference standards
- ISO 9001 change-control and supplier-monitoring principles
- ISO 31000 risk-management guidelines
- IATF 16949 supplier quality requirements where applicable
References are for orientation. Contract-specific obligations should be confirmed with the relevant authority or qualified adviser.